500SL (129.067) V8-5.0L (119.972) (1993)
/v8-5.0l_(119.972)/Page-2566001.png)
Seat Track: Procedures
Front seat moved. See: Service and Repair/Procedures
Screws (3 and 4) on spindle drive
unscrew, to install screw both spindle nuts to rear end stop. 25 Nm.
Seat rail (1)
slide toward rear.
Screws (2 each) at front on seat rail
unscrew (arrow), 14 Nm front, 9 Nm rear
Seat rail (1)
slide forward.
Screws (1 and 2) at rear on seat rail (2 each)
unscrew. 30 Nm.
Seat rail (1)
remove from seat frame.
Reinstall
in opposite order. Observe installation note.
