560SEC (126.045) V8-5.6L (117.968) (1989)
3.
Open the CD changer door and insert the CD magazine. Close the CD changer door.
4.
Turn the radio on and, using the CD changer "mode" button, select the CD playing mode. The radio will begin to play and the display will indicate
"CD" mode, track # and the CD #.
5.
Follow the radio/CD instructions in the operation guide to verify the CD player/changer features.
E. Useful Hints
1.
In the event that there is no audio, check whether the CD changer and radio receiver bus cables are installed correctly at the CD changer.
2.
If the CD changer is not responding, check whether the CD is inserted correctly in the CD magazine.
3.
Further diagnostic information will be published in Diagnostic Manual, Volume 3, Electrical Chassis & Body section, in the near future.
Models 124.034/036 - Installation of CD Changer
Group: 82
Number: 272
DATE: DECEMBER 1991
SUBJECT:
INSTALLATION OF CD CHANGER
MODELS:
124.034/036
1.
Remove contents of parts kit and verify against Parts Information table on last page of work instruction.
2.
Raise rear sunshade and rear headrests. Remove First Aid kit.
Note:
Use caution when drilling mounting holes so as not to drill through the hatshelf.