560SEC (126.045) V8-5.6L (117.968) (1989)
/v8-5.6l_(117.968)/Page-1622001.png)
Parking Brake Pedal: Service and Repair
Removal and installation of pedal assembly for parking brake
-
Unhook return spring (12) on mount (14) and turn back adjustment screw (3) on adjustment bracket (1).
-
Adjust parking brake. See: Adjustments
-
Remove cover (arrow) below instrument panel.
-
Unhook chain (5) on actuating lever (4).
-
Unhook brake control cable (17) from pull tab on pedal (15).
-
Remove spring clip (20).
-
Remove brake control cable (17).
-
Disconnect plug connector (21) from holder (1).
-
Disconnect plug connector on parking brake warning light switch.
-
Screw out hex. head bolts and hex. nuts (13).
-
Remove complete pedal assembly.
