560SEC (126.045) V8-5.6L (117.968) (1989)
/v8-5.6l_(117.968)/Page-646002.png)
117.98.
A protective bead was added in the area of the oil drain plug at the oil pan lower part in order to avoid engine cracks.
Introduction: July 1983
Engine No.
116.963 12 037 088
117.963 12 032 251
If the refrigerant compressor carrier is bolted to the crankcase during oil pan removal and installation it is necessary to ensure tension-free assembly.
The carrier (steel version) must be checked for distortion. There should be no gap between contact points of the support angle and the crankcase. This
condition must be verified before attaching the angle. The bolts must be tightened in the following sequence:
