560SEC (126.045) V8-5.6L (117.968) (1989)
Neutral Safety Switch: Service and Repair
Removing and Installing
1
Release locking device for starter lockout switch plug (8) by turning white plastic ring (arrow) upwards in direction of arrow.
2
Carefully press off plug using two screwdrivers at the cable output and the tab.
3
Unhook shift rod (9) after removing the retaining clip.
4
Unscrew hexagon bolt (51) and pull off range selector lever (52).
Installation Note
Attach range selector lever in such a way that the driver (54) engages in the lever.
5
Unscrew both bolts (55) and remove starter lockout switch (53).