560SEC (126.045) V8-5.6L (117.968) (1989)
/v8-5.6l_(117.968)/Page-1458002.png)
5
Slacken nut for axial retainer (44).
Installation Note
Tightening torque 8 Nm.
The axial retainer is correctly fitted when the slot (arrow) is horizontal.
6
Swivel axial retainer (43) away in a counter-clockwise direction using a screwdriver in the slot (arrow) (corresponds to position "B" in the cross
section).
Installation Note
Rock centrifugal governor gently back and forth in an axial direction turning axial retainer (43) clockwise until it engages correctly (position "A" in
cross section).
20 Secondary pump
43 Axial retainer
44 Nut for axial retainer
46 Cover
47 Snap ring
50 Centrifugal governor
