560SL (107.048) V8-5.6L (117.967) (1989)
2.3 To adjust the bearing bolt use pin spanner 180 589 01 05 00 and loosen cross-hole nut.
FIGURE 8
2.4 Adjust bearing bolt (3) to dimension "a" approximately 2 mm, in such fashion that the backrest mounting bracket neither chatters nor contacts the
frame tunnel (Figure 8).
2.5 Lock bearing bolt with cross hole nut. Ensure that the contact surface between the cross-hole nut and the backrest mounting mechanism is maximized
within the restraints listed in step 2.4 (Figure 8).
If the adjustment does not resolve the problem, replace bearing bolt (3). Repeat the adjustment.
FIGURE 9
3.
Eliminating Play at Seat Hinge/ Reclining Mechanism
3.1 If the play is determined to be in either gearing or shaft of the reclining mechanism, the complete backrest reclining mechanism must be replaced.
Special Tool Information
Tool Name
Tool Number
Group/Category
Pin spanner
180 589 01 05 00
91/C
Parts Information
Part Name
Part Number