560SL (107.048) V8-5.6L (117.967) (1989)
Brake System (Sheet No. 331.0)
MB Brake Fluid (DOT 4 Plus)
Part No.000 989 08 07 10 (0.75 Liter Container)
Part No. 000 989 08 07 11 (5.0 Liter Container)
Brake Pad Paste (Sheet No. 332)
MB Brake Pad Paste
Part No. 001 989 10 51
Central Hydraulic System-Model 600 (Sheet No. 342)
MB Hydraulic Fluid
Part No. 100 890 00 11
Hydraulic Oil For Load Leveling System and Hydropneumatic Suspension (Sheet No. 343)
MB Hydraulic Oil
Part No. 000 989 91 03 10 all models
NOTE:
Dealer Stock of the previous part no. 000 989 85 03 may be used on vehicles up to M.Y. 1985.
Refrigerants (Sheet 361) Quality R 12
Compressor Oils (Sheet 362)
Windshield Washer Concentrate (Sheet 371)
MB Windshield Washer
Concentrate "S"
Part No. 001 986 19 71 11 (40 ml)
Note:
Refer to S.I. MBNA 82/23b, October 1987, for suggested mixing ratios and temperature recommendations.
Fuel Requirements
1.
Gasoline Engines
Unleaded gasoline containing oxygenates such as Ethanol, MTBE, IPA, IDA, and TBA can be used provided the ratio of any one of these
oxygenates to gasoline does not exceed 10%. The ratio of Methanol to gasoline must not exceed 3% plus additional cosolvents.
Using mixtures of Ethanol and Methanol is not allowed. - MTBE may, however, be added up to 15%. Gasohol, which contains 10% Ethanol and
90% unleaded gasoline, can be used. These blends must also meet all other fuel requirements such as resistance to spark knock, boiling range,
vapor pressure, etc.
As of model year 1987, all gasoline models require premium unleaded gasoline
As of model year 1986, all gasoline models except 190E 2.3 require premium unleaded gasoline