560SL (107.048) V8-5.6L (117.967) (1989)
1
Press out radial seal with a screwdriver.
CAUTION: Do not damage crankshaft and mounting hole for radial seal. Use clean cloth as a base.
2
Examine contact surface on crankshaft. If surface has grooves, install repair size radial seal.
3
Screw inner part of special tool 117 589 00 43 00 onto the crankshaft
4
Coat radial seal with engine oil between dust and sealing lips.
CAUTION: Do no use grease! Grease prevents the sealing lip of the radial seal returning the engine oil.
5
Push radial seal onto inner part of special tool 117 589 00 43 00.
6
Press radial seal into closing cover as far as the stop with the insertion tool 117 589 00 43 00.
NOTE: The dust lip must not be touching the crankshaft otherwise leaks will occur as a result of the pumping effect.
7
Install driven plates in the correct order.