560SL (107.048) V8-5.6L (117.967) (1989)
/v8-5.6l_(117.967)/Page-1680001.png)
Air Door Actuator / Motor: Service and Repair
Center Nozzle Flaps
VACUUM ELEMENT (4OA) FOR CENTER NOZZLE FLAP
REMOVAL:
1. Remove center console.
2. Remove instrument panel.
Supports (70 & 71), Bracket (72)
3. Remove support (70 and 71) as well as angle bracket (72).
4. Pull 2-pole coupler from temperature sensor (6).
5. Pull off vacuum line (arrow) for vacuum element of legroom flaps.
6. Disconnect cable connector terminal 58d.
