560SL (107.048) V8-5.6L (117.967) (1989)
/v8-5.6l_(117.967)/Page-1710002.png)
Installation note:
-
Use key inserter 126 589 01 35 00 to install.
-
The tapered surface of the circlip must be toward the front.
8
Insert assembly tool for sealing plate and push holding ring (arrow) down as far as the mark.
Pull out sealing plate (53) and remove from the tool.
Installation note:
-
Ensure that sealing plate is installed in correct position; coat 0-ring (arrow) with refrigeration oil.
9
Insert assembly tool for shaft seal. Press, turn to the right and extract shaft seal.
