560SL (107.048) V8-5.6L (117.967) (1989)
Combination Switch: Service and Repair
Fig. 5 Combination Switch Replacement
560SL
The steering wheel does not have to be removed to replace the combination switch.
1.
Disable airbag system, refer to MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
Remove rubber sleeve from combination switch.
3.
Remove two combination switch attaching screws.
4.
Pull combination switch out slightly, then disconnect the two screw type electrical connectors, then pull cable outward, Fig. 5.
5.
Remove lower instrument panel cover attaching screws, then remove.
6.
Disconnect plug type electrical connector, then remove switch.
7.
Reverse procedure to install.
Fig. 4 Combination Switch Replacement
EXCEPT 560SL
1.
Disable airbag system, refer to MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
Remove steering wheel, refer to Steering and Suspension/Steering/Steering Wheel/Service and Repair.
3.
Remove instrument panel lower cover.
4.
Remove three combination switch attaching screws, Fig. 4.
5.
Disconnect electrical connector under instrument panel.
6.
Remove combination switch from vehicle.
7.
Reverse procedure to install.