560SL (107.048) V8-5.6L (117.967) (1989)
Ignition Switch Bezel
1.
VERSION 1 (Chrome plug-on cap)
a. Insert ignition key and turn ignition switch to position "1".
Chrome Cap Removal
b. Lift cap (2) up to bottom edge of key. If necessary, use a small hook to pull up cap.
c. Turn ignition switch to position "0" and remove key together with cap.
Detent Location
d. Re-insert key and turn ignition switch back to position "1". Push detent (10) and remove lock cylinder.
2.
VERSION 2 (Plastic plug-on cap)
a. Remove ignition key.
b. Pull off cap using a bent 1 mm wire.
c. Insert ignition key and turn ignition switch to position "1".
d. Push cylinder detent (to the right of top center) and remove lock cylinder.
3.
VERSION 2 (Screw-on cap)
a. Remove ignition switch bezel.
b. Turn ignition switch to position "1".