560SL (107.048) V8-5.6L (117.967) (1989)
/v8-5.6l_(117.967)/Page-1596008.png)
22. Unscrew center-position check screw, screw closing plug into steering housing together with a new copper sealing ring. Remove assembly pin
from steering shaft.
23. Screw hex. socket screw (13) into lower flange of steering coupling (12) and tighten. Tightening torque 25 Nm (2.5 kpm) reference value.
24. Slip pitman arm on splining of pitman shaft, while paying attention to code number and markings (arrow) on lever and on pitman shaft.
Note:
On model 107.026 install only the sickle-shaped pitman arm (3) part no.107 463 16 01 (code number 0716). This arm replaces simultaneously the
pitman arms, part. no.107 463 10 01 (code number 0710) and 107 463 12 01 (code number 0712) valid for the other lefthand steering models.
The pitman arm 107 463 13 01 (code number 0713) is valid for all right hand steering models.
