560SL (107.048) V8-5.6L (117.967) (1989)
/v8-5.6l_(117.967)/Page-1596009.png)
25. Attach pitman arm (24) with a new self-locking hex. nut. Tighten hex. nut to 160-200 Nm (16-20 kpm).
Attention!
Be sure to renew self-locking hex. nut on principle.
26. Check rubber sleeve (2) on joint of track rod (11). If the sleeve is damaged, check joint for wear and replace, if required.
27. On drag link 1st version, check joint of drag link for wear and replace drag link, if required.
