560SL (107.048) V8-5.6L (117.967) (1989)
/v8-5.6l_(117.967)/Page-1362007.png)
5 Press radial sealing ring of 81 mm OD into bearing cap until installer rests against cap.
Note: Coat radial sealing ring together with rubber coated sheet-metal jacket on OD with rubber sliding compound "naphtalene or hypoid gear
oil".
Rear axle center piece without lateral bearing caps
6 Coat radial sealing ring at OD with rubber sliding compound "naphtalene H or hypoid gear oil" and knock-in by means of installer, until installer
(49a) rests against rear axle housing (54).
