600SEL (140.057) V12-6.0L (120.980) (1993)
Electrical connections on control module
disconnect, connect.
(only for vehicles up to approx. 11/96)
Navigation processor
remove from holder (1) together with CD-ROM drive (A2/30), install
NOTE: Before installing a new navigation processor with CD-ROM drive, remove transport lock.
NOTE: When replacing the navigation processor with CD-ROM drive (A2/3O) the system must be put into operation, because it is necessary to
store specific vehicle data. For vehicles with navigation processor up to 11/96 a test CD is required for this purpose.
Activation of the language requires approx. 30 minutes.
Commercially available tester
Quiescent current retention unit
e.g. Hans Zeheter CMP 12.2