600SEL (140.057) V12-6.0L (120.980) (1993)
Rear Door Exterior Handle: Service and Repair
Replacement of Exterior Door Handle on Rear Door
Door sealing frame
pull out of channel in area of door lock.
Screw (1)
screw out while pressing door handle toward front. Do not remove screw (1); it is secured against falling by a retaining washer.
Door handle (2) with base (3)
move toward front and remove.
Observe installation note!
Door handle (2) with base (3)
install so that actuating lever (arrow) on door handle (4) engages in door lock.
Screw (1)
screw in (6 Nm).
Door sealing frame
press into channel in area of door lock.
Installation note
Adjust position of door handle on door panelling with screw (5) (Allen wrench WAF 3mm)
Special tool
Removal, installation
1
Pull door sealing frame out of channel in area of door lock.