600SEL (140.057) V12-6.0L (120.980) (1993)
5
Screw out screws (10), TX 30 (4 each) on bearing (11) and remove bearing (11).
6
Screw out screws (12) and remove lock.
NOTE: The cover cannot be removed from the foam pad on the armrest. It is only possible to replace the cover completely together with the foam
pad.
7
Reassemble in opposite order.
NOTE: All screws with metric threads are micro-encapsulated and must be replaced after disassembly or coated with a screw locking agent
(Loctite). Observe installation note!