600SEL (140.057) V12-6.0L (120.980) (1993)
press outward through openings in pop-up/sliding roof frame (Fig. 2) with screwdriver and lower headliner.
Clips in opening for make-up mirror
press off of bracket (Fig. 4).
Backrest on driver's and passenger seat
move back.
Headliner
unhook from pop-up/sliding roof frame from front and lay down on rear shelf.
Headliner (front section)
guide through open rear side window and remove through passenger door in direction of arrow (Fig. 5).
Removal note
On Model W 140 without tilting/sliding roof it is necessary to remove the headliner through the passenger door. For this purpose remove the bolt on
the door retainer to obtain additional free space for removing the headliner.
On Model V 140 both headliner versions can be removed through the rear door.
Shop-made tool: Hook
Installation
1
Lay headliner into vehicle.
2
Install bolt on door retainer.
3
Hook headliner onto tilting/sliding roof frame with retaining bar (arrow).
4
Attach clips (item 1) by pressing up on headliner in openings on tilting/sliding roof frame.
NOTE: Do not press in separately because otherwise headliner can be damaged in this area. Use piece of wood to press up.