600SEL (140.057) V12-6.0L (120.980) (1993)
pull off.
Clip (1) on panelling (2)
unhook on B-pillar with screwdriver.
Panelling (2)
Pull up out of cover (4) on main frame member.
Belt end fitting on driver's seat
screw off.
Belt on panelling (2)
Pull out and lay panelling (2) to side.
Clip (1)
stick into panelling (2).
Belt end fitting
guide through opening in panelling (2).
Panelling (2)
insert into channel in panelling (4).
Sliding piece
insert into panelling (2) on guide bolt for upper belt guide fitting.
Panelling (2)
Clip in at top with clip (1).
Panelling (2)
insert into clips (3) at side (4 clips).
Belt end fitting
screw onto driver's seat (35 Nm).
Door edge protector
install on B pillar.
Check
function of adjustable upper belt guide fitting
Removal and Installation
1
Pull off door edge protector in area of B-pillar panelling.
2
Unhook retaining clips at top front and rear with screwdriver.