600SEL (140.057) V12-6.0L (120.980) (1993)
Panelling (3)
remove.
Clamps (4) and (5)
align on panelling (3).
Belt end fitting
guide through opening in panelling and screw onto rear floor (35 Nm).
Panelling (3)
insert into cutout in rear pillar at front with clips (4 and 5) and clip into 3 front mounting hooks.
Screw (1)
screw in.
Reinstall
in opposite order.
Remove/Install Panelling At Front Of Roof Frame
Preliminary work:
Molding at side of windshield removed. See: Remove/Install Paneling on A-Pillar
Ceiling light removed.
Interior mirror (1)
remove.
Screws (2)
screw out, remove mounting plate (3).
Screws (4)
screw out, remove sun visor (5).
Screws (6)
screw out, remove mount (7).
Panelling (8)
remove.
NOTE: On vehicles with sliding roof the bar at the front of the roof cutout must be removed upward.