600SEL (140.057) V12-6.0L (120.980) (1993)
Trim Panel: Service and Repair
Trunk
Remove/Install Panelling In Trunk
Cover (1)
remove.
Bulb holder for left taillamp
open.
Panelling (2)
remove, by removing three plug-in clips (arrows) and pull out panelling (2) starting at the top.
Stowage compartment (4)
remove.
Spare wheel cover
open and remove plug-in clip in the front of the spare wheel recess (arrow).
Bulb holder for right taillamp
open.
Panelling (3)
remove, by removing the remaining plug-in clips (2 pieces, arrows) and pull out panelling starting at the top.
Panelling (5)
remove (panelling on rear center panel removed), and remove plug-in clip (5 pieces). See: Remove/Install Panelling On Rear Center Panel
Panelling (6)
remove (10 plug-in clips) and remove panelling (6).
Reinstall
in opposite order.
Remove/Install Panelling On Inner Trunk Lid