600SEL (140.057) V12-6.0L (120.980) (1993)
Figure 5
Figure 6
Head restraints (7)
raise.
Cover (4)
detach from head restraint clip and remove.
Both locking levers (arrows, figure 3)
press and simultaneously withdraw the head restraints rearwards.
Head restraints (7)
remove.
Reinforcement plate (arrows, figure 4) on head restraints
align.
Cover (4) with the plastic angle
lay down on reinforcement plate and fix cover (4) in the reinforcement plate with the lower locking lugs (center arrows, figure 5).
Head restraints together with the cover (4)
insert in the head restraint mechanism while putting the cover (4) under the rear shelf.
Cover (4) and head restraint (7)
engage or lock by means of a powerful blow with the ball of the thumb.
Cover (4)
align by shifting laterally at the rear shelf.
Function check for lowering of head restraint
perform.