600SEL (140.057) V12-6.0L (120.980) (1993)
7.
Push drainage pipe over the fitting and route between crankcase and power steering pump bracket (Figure 8).
B.
Proceed with reassembly in reverse order of removal.
Parts Information
Part Name
Part Number
Drainage pipe kit
103 200 20 52
Sealant/locker (e,g Loctite(R) 242/Wurth(R) 242)
Local purchase
In Case of Warranty
Operation: Coolant pump drainage pipe, retrofit (02-2028)
Coolant pump drainage pipe. install (02-2029)
(when replacing coolant pump)
Model 126 With Engines 116.96/117.96
MODEL 126 WITH ENGINES 116.96/117.96
1.
Remove/install fan shroud.
Remove/install fan viscous clutch and fan together with the fan shroud.
Tightening torque:
Collar bolts 25 Nm
2.
Remove/install V-belts for power steering pump, generator, AC compressor and secondary air injection pump (SMS, Repair Instructions, Job no.
13-340).
3.
Remove/install crankshaft pulley.
Tightening torque:
Crankshaft pulley hex bolts 35 Nm