600SEL (140.057) V12-6.0L (120.980) (1993)
Fuse Block: Service and Repair
Front Fuse and Relay Box
Ground cable at battery
disconnect, connect.
Fuse box cover (1)
remove, install.
Wiper system relay (K26)
remove from mount, install.
Wiper relay holder (2)
remove, install.
Screws (3)
unscrew, screw in.
Relay box cover (4)
remove, install.
Screws (5)
unscrew, screw in.
Fuse holders (6)
remove from fuse and relay box (F1) and disconnect, install and reconnect (see note).
Relay carrier (7)
remove from fuse and relay box (F1), install.
All relays and control modules (arrow)
remove, install.
Electrical connections from relay carrier (7)
unclip, clip in.
Fastening nuts for fuse and relay box
unscrew, screw in.