600SEL (140.057) V12-6.0L (120.980) (1993)
39. Insert bearing flange (4) in pump housing (2) and fasten with 4 bolts M8 (4b).
Tightening torque 25 Nm.
Insert O-ring (2g), screw on oil reservoir (35) with bolts (35a).
Tightening torque: 8 Nm.
Work step number 40 is omitted.
After installing the tandem pump (operation no. 46-0710), fill or bleed systems (40-0715). Check tandem pump for operation and leaks, connect
pressure gauge if required and check pump pressure (operation no. 46-3070).