600SEL (140.057) V12-6.0L (120.980) (1993)
Component Identification, Part 2
2
Insert slip ring and assemble with new screws (32j).
Component Identification, Part 3
3
Connect cable which has been pushed in for the horn (32k) in the top right contact plate (arrow).
4
Disconnect cable (38d) from the flat-pin connector (38e) and connect to the flatpin connector of the slip ring.
Replacement Steering Wheel In Installed Condition For Vehicles With Contacts
NOTE: Pay attention to what special equipment is installed when replacing the steering wheel:
2 Brass contact rings = standard (horn rings)
4 Brass contact rings = airbag
2 Brass contact rings + 1 Steering angle magnetic ring (arrow) = ADS
4 Brass contact rings + 1 Steering angle magnetic ring (arrow) = Airbag, ADS