600SEL (140.057) V12-6.0L (120.980) (1993)
Installation Note
After inserting, press snap ring upwards around entire circumference using a screwdriver.
2. Tilt outside disc carrier (1) and remove discs. Check inside discs for scorching and wear (reference thickness 2 mm).
Installation Note
Note sequence of clutch discs. Assemble discs as described in transmission diagram. Before installing, immerse in ATF for approx. 1 hour.
3. Attach assembly device (020) to spring seat and clamp unit snap ring (5) is accessible. Remove snap ring.
Installation Note
Check that snap ring is correctly seated after installation.
4. Remove spring seat (4) and compression springs (3).
Installation Note
Note number of return compression springs and ensure that each spring is centered by one guide lug on the spring seat.