600SEL (140.057) V12-6.0L (120.980) (1993)
Window Frame: Service and Repair
Replacement of Window Frame Molding on Driver's Door
Preliminary work:
Removal and installation of exterior mirror.
Removal and installation of outer sealing bar. Refer to "Replacement of Sealing Bar". See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair
Removal and installation of surround on driver's door. Refer to "Replacement of Surround". See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Service and Repair
Window guide rail in area of molding
remove
Molding (1)
remove with caulking tool, use special tool 116 589 07 59 00.
Molding (1)
install, whilst starting the top rear and aligning molding flush with window frame.
Molding (1)
install with caulking tool, whilst checking the installed position (arrow) to surround.
Surround (2)
install, (Repair instructions "Replacement of Surround"). See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
Reinstall in opposite order.