600SEL (140.057) V12-6.0L (120.980) (1993)
NOTE: Ensure that distance from edge of window to clip is sufficient to allow installation of molding without damaging window.
2
Apply strips of tape (arrows), cut through at top of window and remove window.
3
Remove protective foil from retaining Strips.
Installing Rear Window
References (WH), Commercially available tools
1
Attach both suction cups to rear window.
2
Center rear window in window cutout with help from second mechanic and align so that strips of tape coincide.
3
Set rear window on glue bead and press down until it makes contact with rubber window spacers.
NOTE: On model 210.02 with tailgate the window must make contact with the cover.
NOTE: Open side window in car to prevent the window from being pressed outwards by the air pressure when a door is closed.
NOTE: Install rear window within 5 minutes after applying glue before adhesive force of glue begins to decrease.
NOTE: The curing time is approx. 1 hour measured from the time the rear window is installed.
Cutting Out Rear Window With Cutter
References (WH), Commercially available tools