600SEL (140.057) V12-6.0L (120.980) (1993)
application nozzle and insert cartridge into cartridge gun.
NOTE: Heat-up time at least 20 minutes.
2
Guide nozzle along adhesive surface or glue residue on body flange while pressing a uniform quantity of glue out of the glue cartridge.
NOTE: Height of glue bead approx. 13 mm.
NOTE: Install windshield within 5 minutes before adhesive force of glue begins to decrease.
Aligning Rear Window In Body Opening
References (BE), Test and adjustment values for rear window
Figure 1
1
Before applying glue align rear window in body opening (observe dimension "A", measured between top of window and rear edge of roof).
NOTE: Ensure that distance from edge of window to clip is sufficient to allow installation of molding without damaging window.
2
Apply strips of tape (arrows), cut through at top of window and remove window.
3
Remove protective foil from retaining strips.
Installing Rear Window
References (WH), Commercially available tools