600SEL (140.057) V12-6.0L (120.980) (1993)
Window Shade: Service and Repair
Preliminary work:
Disconnect cable lead at battery
Remove rear shelf. See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair
Fixing nuts (arrows, figure 1)
unscrew from the trunk (6.5 - 7 Nm)
use special tool 001 589 72 21 00.
Plug connector on motor (arrow, figure 2)
disconnect.
Roller blind (1)
remove.
Installation
install in opposite order.
NOTE: Align roller blind if required and only finally tighten after installing the rear shelf - note tightening torque.
After completing the repair, adjust basic settings of side windows for the automatic raising/lowering.
Special tools