C 230 (202.023) L4-2.3L (111.974) (1998)
/l4-2.3l_(111.974)/Page-1255001.png)
Technical Service Bulletin # S-SI-07_6_01
Date: 980201
Computers - Crankshaft Position Sensor Connector Replace
Date: February 1998
Order No.: S-SI-MBNA-07.6/O1
Supersedes:
Group: O7
SUBJECT:
ENGINE 104 AND 111 WITH ME-SFI 2.1
REPLACEMENT OF CRANKSHAFT POSITION SENSOR (L5) CONNECTOR
In vehicles equipped with engine 104 and engine 111 using the ME-SF 2.1 system. it is possible for water to enter the 2-pole connector for the crankshaft
position (CKP) sensor (L5) (arrow. Figures 1 and 2), located at the top rear of the crankcase near the starter ring gear. This will cause engine running
complaints.
An improved repair solution is now available, which consists of a repair harness kit.
Included in this Service Information is Work Instruction 388, which details the complete repair procedure.
Work Instructions
Group: 07
Number: 388
Date: February 1998
Work Instructions
