C 230 (203.040) L4-1.8L SC (271.948) (2005)
/l4-1.8l_sc_(271.948)/Page-680003.png)
5 Fit on riveting tool (1 ) so that the spacer webs (arrow) are resting on the rollers of the riveted link.
6 Screw in pressure screw at rivet press tool (1 ) until solid resistance is felt. m When turning the spindle, ensure that the pins of the riveted link move
into the holes of the outer plate (9).
7 Remove rivet press tool (1).
8 Convert assembly insert (8) with the digit D10 to the illustrated rivet profile (arrow).
9 Fit on rivet press tool (1 ) exactly above the center of the pin (arrow). m Rivet pins of the riveted link individually.
10 Tighten pressure screw at rivet press tool (1 ) ED .
11 Remove rivet press tool (1).
12 Inspect riveting (arrows), re-rivet if necessary.
