C 230 (203.040) L4-1.8L SC (271.948) (2005)
/l4-1.8l_sc_(271.948)/Page-688002.png)
ED Crankshaft bearing cap
1 Clean bearing points in crankcase, main bearing cap and main bearing journal of crankshaft with a chamois leather.
After a bearing damage, it may be necessary to remove any swarf from the crankshaft and crankcase oil galleries as well as the crankcase! Do not use
any hard objects for cleaning. Blow through oil galleries in direction of flow oil with compressed air.
The top crankshaft bearing shells to the crankcase are assigned by means of color codings (on the reverse side of the crankshaft bearing shells) and
center punch marks, which are stamped in at the crankcase (see arrows).
Only assigned color and center punch mark combinations (see table) may be fitted together.
The bottom crankshaft bearing shells are assigned to the basic journal of the crankshaft by means of letters (initial letter of the particular color).
