C 230 (203.040) L4-1.8L SC (271.948) (2005)
/l4-1.8l_sc_(271.948)/Page-690006.png)
5 Install top thrust washers (8).
The oil grooves of the thrust washers (8) must point towards the crankshaft webs (1 O).
6 Install the crankshaft bearing caps (2) according to the marking. When installing the fit bearing cap (3) hold both thrust plates (8) tight.
The anti-twist locks (11 ) of the thrust plates (8) must be seated in the grooves (12) of the fitted bearing cap (3).
The oil grooves (9) of the thrust plates (8) must point toward the crank webs (10).
BA03.20-P-1000-01B Crankshaft
Crankshaft
BE03.20-P-1000-04E Inspection Data of Crankshaft Bearing Clearance
BE03.20-P-1000-04E Inspection data of crankshaft bearing clearance
