C 230 (203.040) L4-1.8L SC (271.948) (2005)
necessary. The correct oil level should be measured at a transmission oil temperature of 80 degree C.
NOTE: At a transmission fluid temperature of 25 degree C, the fluid level must be within the range "A". At a transmission fluid temperature of
80 degree C, the fluid level must be within the range "B".
12
Warm up transmission
NOTE: Wait at least two minutes after reaching a transmission oil temperature of 80 degree C.
13
Move selector lever to position "R" or "D"
NOTE: Apply service brake.
14
Check transmission oil level
NOTE: Move selector lever to position "P".
15
Correct transmission oil level
NOTE: If too much transmission oil is added, it is absolutely essential to drain off or extract the surplus.
16
Check transmission for leaks
CAUTION: If loss of oil present, determine cause and rectify. An insufficient or excessive oil quantity causes malfunctions and
transmission damage.
Install
17
Fit cap (93) on oil filler tube
18
Press in new locking pin (93a)
NOTE: The locking pin (93a) must lock in place.