C 230 (203.040) L4-1.8L SC (271.948) (2005)
AR26.60-P-0600-02V Disassemble, Assemble Center Shifter Console and Shift Rod at Transmission
AR26.60-P-0600-02V Disassemble, assemble center shifter console and shift rod at transmission
- Vehicles with single pole circuit
Component Identification
Shown on transmission 716.631
1
Unlock the lock of the bolt (2a) using a screwdriver and swivel bolt (2a) upwards through 90 degrees.
2
Pull bolt (2a) out of the center shifter console (2).
3
Pull locking pin (3) out of connecting piece (4).
4
Remove center shifter console (2) from transmission and shift rod (1) with connecting piece (4) from main shaft.
5
Install in the reverse order.
AR26.60-P-0600E Removing and Installing Floor Shift
AR26.60-P-0600E Removing and installing floor shift
- TRANSMISSION 716.6
- with CODE (424) Sequentronic automated manual transmission (SEQ)