C 230 (203.052) V6-2.5L (272.920) (2007)
Timing Cover: Procedures
AH01.40-P-1000-01VA Notes on Sealant Path For Timing Case Cover
AH01.40-P-1000-01VA Notes on sealant path for timing case cover
Component Identification
The lines (1) identify the application of the sealant.
The sealing surface must be cleaned. Sealant should be applied only to the specified surface, in the form of a bead of height and width 1.5 mm ± 0.5
mm. The sealing compound must be applied within 10 min. The sealing compound bead must not be spread. Use only the sealant indicated in Repair
Materials.
AR01.40-P-8000-01VA Bolt Diagram For Timing Case Cover
AR01.40-P-8000-01VA Bolt diagram for timing case cover