mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Recall - ECM Software Update/Cat Converter Replacement|Page 6398 > < Recall - ECM Software Update/Cat Converter Replacement|Page 6396
Page 8
background image

^

Drive vehicle onto highway with speed limit of 55 mph or higher.

^

Accelerate vehicle slowly to 55 mph, then release gas pedal to decelerate down to 52 mph.

^

Repeat procedure until Actual value counter reaches 6.

^

Click "F2" once it becomes available to proceed to final test.

^ Perform final "Catalyst efficiency" test (Figure 7).

^

While driving keep Catalyst temperature right, Catalyst temperature left, Exhaust flow right, and Exhaust flow left values in green area until test is
completed.

^

DAS will automatically proceed to test results page.

3. Perform one of the following, depending on results of test (circled area of Figure 8):

^

If text reads Catalyst right do not renew and Catalyst left do not renew: Disconnect Star Diagnosis and proceed to step 5.

^

If text reads Catalyst right renew or Catalyst left renew: proceed to step 4 replace both catalytic converters.

4. Replace both catalytic converters; refer to WIS document AR49.10-P5531QB.

Note:

Recall - ECM Software Update/Cat Converter Replacement|Page 6398 > < Recall - ECM Software Update/Cat Converter Replacement|Page 6396