mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Recall - ECM Update for E85 Fuel Usage|Page 6360 > < Engine Controls - Code 061B After Reprogramming
Page 1
background image

Technical Service Bulletin # 2007040005

Date: 070501

Recall - ECM Update for E85 Fuel Usage

Campaign No. 2007040005

May 2007

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: 
MODEL 203.052

MODEL YEAR:
2007

CHECK ENGINE CONTROL MODULE SOFTWARE AND UPDATE AS REQUIRED

This Recall Campaign has been initiated because DCAG has determined that on affected vehicles the software for the engine control module may need to
be updated regarding fuel type for Flex Fuel Vehicles. Vehicles without the engine control module software update that are filled only with E85 fuel may
experience starting problems, rough vehicle operation and "Check Engine" lamp illumination. Dealers  will update the engine control module software as
required.

Prior to performing this Recall Campaign:

-

Please check VMI to insure the vehicle is involved in the Campaign and if it has been previously repaired.

Note:

Do not perform Recall Campaign P-RC-2007040006 in addition to or in place of this Recall Campaign.

-

Please review the entire Recall Campaign bulletin and follow the procedure steps exactly as described.

Shown in this bulletin is a sample copy of a letter which owners of the affected vehicles will receive.

Approximately 11,934 vehicles are affected.

Procedure

Note

Prior to starting the procedure ensure to:

^

Use DAS version 04/2007 or higher with all associated patches

^

Follow the steps exactly as described in DAS Connect battery charger

1.

Connect Star Diagnosis.

2.

Check engine control module software.

^

Follow the DAS path "Control unit adaptations/ Control unit programming" and on-screen instructions.

Recall - ECM Update for E85 Fuel Usage|Page 6360 > < Engine Controls - Code 061B After Reprogramming