C 230 CL (203.740) L4-1.8L SC (271.948) (2003)
Seat Back Frame: All Technical Service Bulletins
Interior - Split Rear Rear Seat Back Cover Damage
Date: March 8, 2006
Order No.: P-B-91.12/105
Supersedes: MB-Net No. 580 dated Dec. 8, 2000
Group: 91
Revision History
Revision
Date
Purpose
a
3/8/06
Warranty Information Updated
-
12/05/00
Initial issue
SUBJECT:
Model 203.740/747/764
Split Rear Seat Unit Damaged
If you receive customer reports in the above model vehicles of the backrest cover on the 2/3 split rear seat being damaged in the area below the armrest
when the seat is folded down, perform the following to resolve. This may be a result of welding splashes on spot welds beneath the 2/3 split rear seat
backrest.
1.
Deburr spot welds
2.
Replace backrest cover. Refer to EPC for applicable part number.
In case of paintwork damage, restore paintwork.
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair.
In Case of Warranty, use the table.