C 230 CL (203.740) L4-1.8L SC (271.948) (2003)
Parking Brake Tensioner: Service and Repair
Parking Brake - Adjusting Cable Slack Adjuster
Shown On Model 203
Remove, Install
DANGER:
-
Risk of fatal accident from vehicle slipping or toppling off the lift platform
-
Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points
specified by the vehicle manufacturer.
Inspect
1
Depress parking brake pedal with a force of approx. 170 N
NOTE: If the parking brake pedal can be depressed by more than 5 notches: Perform steps 2 to 6.
2.1 Fold back rear seat cushion
2.2 Remove rear seat cushion
3
Remove cover (1)
4
Correct lengthening of parking brake cables (85, 86)
NOTE: To do this, tighten nut (89) two turns and re-check parking brake pedal travel. If necessary, tighten the nut (89) further until the parking
brake pedal can be depressed by 5 notches when operated with a force of approx. 5 N.
5
Check that the rear wheels can turn freely
6
Install in the reverse order