C 230 CL (203.740) L4-1.8L SC (271.948) (2003)
/l4-1.8l_sc_(271.948)/Page-759007.png)
1. Replace left and right camshaft solenoids (A, Figure 7): Refer to WIS: AR05.20-P-7295PK. Install new camshaft solenoid stop plugs (C, Figure 7)
into new camshaft solenoids (A, Figure 7).
2. Install camshaft solenoid adapter harnesses (B, Figure 7): Connect adapter harness between connector on camshaft solenoid and engine harness.
Secure adapter cable (B, Figure 7) to engine with cable ties (arrows).
Note:
Ensure cable ties (arrows) are secured to engine as shown otherwise cover will not properly fit over camshaft solenoids (A) and wire chafing may occur.
