C 230 CL (203.740) L4-1.8L SC (271.948) (2003)
/l4-1.8l_sc_(271.948)/Page-777002.png)
The crankshafts are inserted into the side in the crankcase as an interference fit. The fit is offcentered 0.5 mm with the result that the crankshaft
bearing caps can be installed only in one position. If installed correctly, the lug (arrow) on the crankshaft bearing cap points to the left, when viewed in
direction of travel.
The crankshaft bearing caps (6, 6a) are numbered consecutively, beginning at the first crankshaft bearing cap at the front.
AR03.20-P-4360-01TK Assign Crankshaft Bearing Shells
Assign crankshaft bearing shells
