C 230 CL (203.740) L4-1.8L SC (271.948) (2003)
/l4-1.8l_sc_(271.948)/Page-875002.png)
5 Knock crankshaft radial sealing ring into crankcase with light blows from a hammer, until the lower edge of the drift (2) is resting on the crankcase.
6 Take off drift (2).
The crankshaft radial sealing ring must be positioned at right angles to the crank journal (3) otherwise proper sealing is not assured.
The installation depth (B) of the crankshaft radial sealing ring (1 ) is fixed by them drift (2) and must not be altered subsequently.
