C 230 CL (203.740) L4-1.8L SC (271.948) (2003)
Tie Rod End: Removal and Replacement
AR46.40-P-0200I Remove/Install Outer Tie Rod
Remove/install Tie Rod
Shown On Model 220
1
Remove front wheels
2
Press tie rod joint (10a) out of steering knuckle assembly
-
Installation: Replace self-locking nut
3
Loosen lock nut (10f) and unscrew tie rod (10)
NOTE: Counterhold the tie rod (10) to slacken the lock nut (10f) (arrows).
4
Install in the reverse order
5
Check front wheel toe and adjust if necessary
AR46.40-P-0201I Remove/Install Inner Tie Rod With Axial Joint
Remove/install Inner Tie Rod With Axial Joint