C 230K (202.024) L4-2.3L SC (111.975) (2001)
/l4-2.3l_sc_(111.975)/Page-2042001.png)
Power Door Lock Switch: Service and Repair
Removing And Installing Front Door Lock Switch
Illustrated On Model 208
1
Disconnect ground lead from battery
2
Remove door liners on front doors
3
Pull off door foil in area of door lock and disconnect door control module (N69/1, N69/2)
4
Disconnect lock switch connector (S86/1x1, S87/1x1) and expose lead
NOTE: Installation: Replace connectors
5
Pull lock switch (S86/1, S87/1) off of door lock
-
For this purpose press the catch lug on the switch housing behind the electrical lead for the lock switch outward
6
Reinstall in opposite order
7
Check central locking for proper function
