mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABS/TCS - ESP Lamp ON/Code C1142 Set|Page 3950 > < Clutch Pedal Position Sensor / Switch|Description and Operation
Page 1
background image

Acceleration/Deceleration Sensor: Customer Interest
ABS/TCS - ESP Lamp ON/Code C1142 Set

Date: July 17, 2007

Order No.: P-B-42.45/77

Supercedes:

Group: 42

SUBJECT:
All Model 129, 140, 202, 208 an 210 Vehicles

Equipped with Electronic Stability Program (ESP) (CODE 472a)

ESP Indicator Lamp Illuminated / Fault code C1142

If you receive customer reports in the above model vehicles that the ESP indicator lamp is illuminated with fault code C1142 (lateral acceleration
sensor) and that this condition followed any of the below 

reported driving conditions, the fault code can be erased / ignored.

Note:

Do not submit warranty claims as there is not a manufacturing defect / failure.

^

Driving on high-bank curves.

^

Rear end collision.

^

Vehicle spins on a slippery road.

If none of the preceding situations occurred, process the fault code by following the diagnostic procedure contained within Star Diagnosis.

^

Model 129 with Engine 104, 113, 119, 120 - Refer to WIS document AD42.45-P-1001AZ

^

Model 140 - Refer to WIS document AD42.45-P-1001AZ

^

Model 210 with Engine 119 - Refer to WIS document AD42.45-P-1001AZ

^

Model 202 and 208 - Refer to WIS document AD42.45-P-1000AZ

^

Model 210 with Engine 112, 113, 606 - Refer to WIS document AD42.45-P-1000AZ

Note:

The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated
on July 17, 2007. Please refer to Netstar -> Star TekInfo -> Star Time for the most current labor time allowance.

ABS/TCS - ESP Lamp ON/Code C1142 Set|Page 3950 > < Clutch Pedal Position Sensor / Switch|Description and Operation